Adjustable Track bars for Jeep Wrangler
TJ, Rubicon, and Unlimited.

 

Picture of the rear trackbar. Click on picture for larger view.

Pictures of front track bar. Picture doesn't show, but bars are powdercoated black.

Rear Panhard mount kit. Good for lifts 2-2.5" on the rear.

Front Track bar for the JK Wrangler. Good for lifts 2.5-5".

Rear Track bar for JK Wranglers. Also good for lifts 2.5-5".

When a jeep is lifted, the axles shift sideways. This is definitely noticeable with lifts at or over 3". This 'bar bind' causes the chassis and axle to continuously "tug" against each other resulting in uneven ride height (side-to-side), chassis / frame misalignment and "roll and yaw".

An adjustable front track bar is your best option, as opposed to using a relocation bracket particularly on the front or in the rear on lifts over 2.5 inches.... since the bar's arc-of-travel must remain in-sync with the drag link's arc-of-travel or steering wheel "kick" will result.

Our track bars eliminate these problems by mounting it in the original location and having an adjustable tie rod end to accommodate up to 6" of lift on Jeeps thru 2006, and 5" of lift on the newer JK model Wranglers.

The adjustable tie rod end of the front can also be replaced eventually if needed. The Track Bars are powdercoated black, come with poly bushings, dust covers, and greaseable tie rod ends (front).

Our adjustable track bar kits work with any Jeep from 1997 to present.
Also available for the older style Jeeps is an inexpensive fixed mount option for the rear axle. This lower cost option can do the job for mild lifts.

	Live chat by LivePerson