Powertrax No Slip lockers for your Cherokee or Comanche!

  

No-Slip Traction System

The Powertrax No-Slip Traction System is the latest design in locking differential technology. It combines the smooth operation of a limited-slip differential, with the traction performance of a locking differential.

What does this mean? All manual (or full-time) locker kits on the planet use gears to 'lock' the differential. Lockers are all also designed to 'unlock' during street driving so you can go around corners smoothly and not chew up your tires. The problem with every other locker kit on the planet is that the transition between those gears being engaged and disengaged is a BANG/POP! They all can make for jerky driving with ratcheting noise. This can be totally overlocked by some people, or an unbearable distraction for others. Either way, every other locker kit on the planet will have this issue.

The NoSlip does not. It still uses gears which need to engage or disengage, but utilizes a clutch-like mechanism for the transition. This provides a smooth, quiet, and nearly "invisible" locker for your vehicle. You still get 100% traction when you need it, but without the issues that exist with all other locker kits on the planet

Installation is simple because no ring and pinion set-up is required. In addition, no special tools or oils are needed. Step by step model specific instructions are provided with every kit.

The No-Slip Traction System is the ideal solution for just about any light truck, sport utility, and muscle car on the road today. Whether you need the safety of added traction for daily commuting, recreation, work, or just so your muscle car puts power to the pavement instead of burning one wheel up, the No-Slip Traction System is your answer.

DON'T GET STUCK AGAIN!!
The No-Slip Traction System will significantly enhance the traction of your light truck, sport utility vehicle, or van by sending the engine power to the wheels that need it most. Yet on dry pavement, the No-Slip Traction System will allow for full wheel differentiation to prevent additional tire wear. Operation is smooth, quiet and dependable.

UNMATCHED PERFORMANCE!!
The No-Slip Traction System performs under a variety of rugged conditions. Whether it be snow, ice, mud, sand, gravel, or the street, the No-Slip Traction System will help get you to your destination. Its extremely rugged design has been tested and proven worldwide.

The Importance of Traction
Anyone who has watched a vehicle try to climb a slippery slope or over a rock, has noticed that one wheel will begin to slip before the other. Once this happens, the vehicle struggles trying to make it up the obstacle. The slipping wheel will spin-up and take power away from the other drive wheel. Even on a level area that is slippery, one drive wheel will break traction and spin-up. A soft surface such as snow, mud or sand will cause the spinning wheel to sink itself in deeper and deeper causing the vehicle to get stuck. Aside from the inconvenience and annoyance of getting stuck, safety issues include becoming stranded, risking injury while trying to free the vehicle, and increasing the chance of having an accident.
Bottom line: Greater traction makes the important safety difference in avoiding getting stuck and enjoying better vehicle control when driving.

Traction is also important for outdoor enjoyment and recreation. Whether you want your muscle car to lay two stripes when coming off the line, are trying to get your family to their favorite skiing spot, or are getting ready for a weekend of recreational offroading, hunting, or fishing, you need traction.

Open Differentials
Very poor traction behavior is a characteristic of conventional "open" differentials that are still used today as standard equipment 4WD vehicles. This century-old technology delivers virtually all the engine power to the wheel that begins to slip first. Because the wheel that begins to slip has the lowest amount of traction and because all the power is delivered to that slipping wheel, there is insufficient power applied to the non-slipping wheel to adequately propel the vehicle. Although open differentials work adequately on ideal driving surfaces, they perform poorly under adverse traction conditions. Open differentials are what your vehicle is equipped with from the factory.

4 Wheel Drive???
The increasing demand for more traction has made 4x4's so popular that they continue to be produced in record numbers year after year. But "4 wheel drive" is a misnomer that misleads consumers into believing they have the ultimate traction vehicle. They don't. Many 4-wheel drive vehicle owners get stuck in situations they believed their vehicles could easily handle. 4x4's are equipped with the same differentials that have the same shortcomings as those equipped in 2-wheel drive vehicles.

Most 4-wheel drive transfer cases automatically direct engine power to the front axles providing what is referred to as "All-Wheel-Drive" operation. Another misnomer. These transfer cases are, in effect, center differentials that are technically similar to the front and rear differentials. These differentials track the path of least resistance, which unfortunately is the lowest power delivery path. Loss of traction in just one wheel of many of these "full time" 4x4's and the vehicle will lose available power delivery to the other wheels, thereby running the risk of getting stuck.

Selectable 4-wheel drive center sections will, when engaged, provide better traction than all-wheel drive units. But, they cannot be driven on-highway when engaged due to severe driveline windup that can cause serious breakage or bind-up the driveline so badly that the vehicle will stall. Only after lifting the vehicle to relieve the windup will it be able to be driven further. As a result, most selectable 4-wheel drive vehicles are pre-dominantly driven in basic 2-wheel drive mode. Further, front wheel unlocking hubs are often added to entirely disconnect the front wheels from the front axle. To activate the front wheel drive in these 4x4's, the center transfer case must be manually engaged and both front wheel hubs physically turned until locked. Disconnecting is equally as difficult.

Few 4x4 owners understand the ramifications of 4-wheel drive operation or comprehend the true price of ownership. It's an unfortunate reality that performance remains inadequate after spending thousands of dollars more to purchase a 4-wheel drive vehicle and incurring all the associated recurring costs (including much lower gas mileage, accelerated tire wear, added maintenance expenses, higher registration fees, and significant insurance premium increases). 4x4's can now be upgraded with the Powertrax Traction System to achieve the maximum traction performance expected of 4-wheel drive vehicles. 2-wheel drive vehicles can be transformed with the Powertrax Traction System to obtain better traction output than conventional 4 x 4's.

Limited Slip/Posi's
Limited-slip differentials behave very much like open differentials. Through various forms of friction mechanisms, they transfer a relatively small amount of power to the non-slipping wheel. They are generally smooth and quiet, but as the name implies, performance improvement is limited. Friction clutches reduce gas mileage, degrade under normal driving conditions, easily overheat when slipping and usually wear out rapidly becoming useless. The clutch packs require that friction/silencer additives be added to the differential fluid, which reduces overall lubrication effectiveness. Despite the marginal traction benefits offered by limited-slip/posi differentials, consumers have had little alternative but to accept the limited-slip/posi differential options offered by vehicle manufacturers, for marginal traction improvement, in lieu of conventional open differentials.

Lockers!!!
Locking differentials, in effect, lock the two drive wheels together -- somewhat like "spools" that solidly connect the axles together. When powering straight ahead, engine power is equally delivered to both drive wheels. However, unlike spools that will not differentiate when turning and are therefore not streetable, lockers allow full wheel differentiation when cornering. Unlike the poor traction characteristics of open or limited-slip/posi differentials, when one wheel looses traction, locking differentials deliver engine power, not to the slipping wheel, but to the wheel with the highest amount of traction. Although locking differentials deliver excellent traction output and allow full wheel differentiation when turning, they are notoriously harsh and noisy. Disengagement is abrupt, you can hear a ratcheting noise when cornering depending on the background engine noise, engagement is delayed, and significant backlash (slop) is added to the driveline.

Used primarily in heavy industrial applications, that can be more forgiving than passenger cars or trucks, lockers have been adopted out of necessity by extreme off-road and performance-racing enthusiasts despite their harsh drawbacks. Until the development of the Powertrax Traction System, no better alternative has existed for obtaining high traction results.

 

So there you have it in a nutshell.

Look around and you'll find that most serious offroad enthusiasts are running lockers in their 4WD vehicles. They're great not only for the serious wheeler, but also the weekend explorer. Make sure you keep moving, make sure you get home with Powertrax lockers. One other item of notable mention is that the Lockright locker is the easiest locker on the market to install. Every kit comes with step by step instructions so that even the most novice mechanic can get it right. Typically all you need for an installation is a standard set of hand tools and an hour or two of time.

Now head back to the top to check out Rocky Road's unbeatable pricing on Powertrax products!