Search
Close this search box.
Dobinson 6" 80 Series Lift Kit

4″ Dobinson 80 Series Landcruiser Lift – MRR Shocks

4″ Dobinson 80 Series Landcruiser Lift – MRR Shocks

Brand:

Model:

DSSKITMRA5

$3,350.00

Dobinson 6" 80 Series Lift Kit

4″ Dobinson 80 Series Landcruiser Lift – MRR Shocks

4″ Dobinson 80 Series Landcruiser Lift – MRR Shocks

Brand:

Model:

$3,350.00

Description

4″ Dobinson 80 Series Lift Kit

Fits 1992-97 80 Series Landcruiser
The Best riding and handling suspension on the market for your 80 Series.

This is a complete suspension kit, fine tuned specifically for the 80 Series… not some hodge-podge cobbled together setup using the Dobinson components which are not matched to the weight of the Cruiser. This suspension upgrade is specifically designed for your Toyota, to match the vehicle.

WHAT THIS KIT IS: Nitrogen Gas Charged Shocks with Superior Design, thicker walls, longer travel, and the very highest quality Australian-made coil springs, heat treated, fully scragged, powder coated. All Rocky Road kits also include free leveling spacers since the Dobinson suspension sits a bit nose-down once installed.

WHAT THIS KIT IS NOT: It is NOT a spacer lift.
The Spacer lifts end up creating stress on your stock springs, they will sag more quickly and the vehicle will lean and handle poorly when using spacer kits. Eventually, you will need to remove those cheap spacers and pick up a quality suspension… so why not save the headache and do it right the first time!
This is also NOT a cobbled together Dobinson system using parts which were never designed for the Sequoia, its weight, its size. Those Dobinson systems are nothing but a series of compromises which are best avoided if you want this done right the first time!

Rocky Road offers you a complete 80 Series 4″ suspension system, designed specifically for the 1992-1997 model 80 Series.

Designed, developed and tested in Australia by Dobinson Spring & Suspension, in-house suspension design engineers, Dobinson 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world.

As Dobinson export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Dobinson Mono Tube Nitrogen Gas charged shock absorbers are made from the world’s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Dobinson mono tube shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade.

We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia. All Dobinson coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.

What is Included in the Dobinson 80 Series Lift Kit?

  • Front Springs (teal)
  • Rear Springs (teal)
  • Front Struts, twin tube, nitrogen (yellow)
  • Rear Shocks, twin tube, nitrogen (yellow)
  • Optional Steering Stabilizer
  • Optional Castor Bushings
  • Optional Castor Plate
  • Optional Rubber Castor Bushing Kit
  • Optional Radius Arm Chassis Bushing Kit
  • Optional Front Adjustable Track Bar
  • Optional Bump Stop Extensions
  • Optional Sway Bar Extensions
  • Optional 5mm coil spacer
  • Optional 10mm coil spacer
  • Optional 20mm coil spacer
  • Optional 30mm coil spacer
  • Optional Adjustable Upper Trailing Arms
  • Optional Adjustable Lower Trailing Arms
  • Optional Brake Adjuster
  • Optional Rear Track Bar
  • Optional Rear Sway bar extensions (mounts to side of chassis)
  • Optional Rear Sway bar extension (mounts to bottom of chassis)
  • Optional 10mm coil spacer
  • Optional 15mm coil spacer
  • Optional 30mm coil spacer

Why Choose Dobinson MRR Shocks?

  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 60mm CNC Machined High Flow Billet Aluminum Race Piston
  • 2.6″ Precision Honed Shock Body
  • 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM-HNBR Sealing System
  • TSUGAMITM CNC machined components for precise tolerances
  • Parker TM Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low-wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • Direct Bolt-On Design
  • CNC TIG Precision Welded Body End Mounts
  • Fully Rebuildable Design
  • MRA59-A685 / MRA59-A885 Long Travel Shocks Require 1.5″ bump stop extensions and extended brake lines
  • If doing a 2.5″ lift or higher in the front, a diff-drop kit or longer TRD CV-axles are REQUIRED, failure to complete these requirements could cause OE CV-axle failure. 14mm bump stop extensions are also required

Additional information

Weight90 lbs
Dimensions30 × 20 × 20 in
Make Model Year
Lexus LX450 1992 - 1997
Toyota Landcruiser 1992 - 1997

4″ Dobinson 80 Series Lift Kit

Fits 1992-97 80 Series Landcruiser
The Best riding and handling suspension on the market for your 80 Series.

This is a complete suspension kit, fine tuned specifically for the 80 Series… not some hodge-podge cobbled together setup using the Dobinson components which are not matched to the weight of the Cruiser. This suspension upgrade is specifically designed for your Toyota, to match the vehicle.

WHAT THIS KIT IS: Nitrogen Gas Charged Shocks with Superior Design, thicker walls, longer travel, and the very highest quality Australian-made coil springs, heat treated, fully scragged, powder coated. All Rocky Road kits also include free leveling spacers since the Dobinson suspension sits a bit nose-down once installed.

WHAT THIS KIT IS NOT: It is NOT a spacer lift.
The Spacer lifts end up creating stress on your stock springs, they will sag more quickly and the vehicle will lean and handle poorly when using spacer kits. Eventually, you will need to remove those cheap spacers and pick up a quality suspension… so why not save the headache and do it right the first time!
This is also NOT a cobbled together Dobinson system using parts which were never designed for the Sequoia, its weight, its size. Those Dobinson systems are nothing but a series of compromises which are best avoided if you want this done right the first time!

Rocky Road offers you a complete 80 Series 4″ suspension system, designed specifically for the 1992-1997 model 80 Series.

Designed, developed and tested in Australia by Dobinson Spring & Suspension, in-house suspension design engineers, Dobinson 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world.

As Dobinson export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Dobinson Mono Tube Nitrogen Gas charged shock absorbers are made from the world’s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Dobinson mono tube shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade.

We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia. All Dobinson coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.

What is Included in the Dobinson 80 Series Lift Kit?

  • Front Springs (teal)
  • Rear Springs (teal)
  • Front Struts, twin tube, nitrogen (yellow)
  • Rear Shocks, twin tube, nitrogen (yellow)
  • Optional Steering Stabilizer
  • Optional Castor Bushings
  • Optional Castor Plate
  • Optional Rubber Castor Bushing Kit
  • Optional Radius Arm Chassis Bushing Kit
  • Optional Front Adjustable Track Bar
  • Optional Bump Stop Extensions
  • Optional Sway Bar Extensions
  • Optional 5mm coil spacer
  • Optional 10mm coil spacer
  • Optional 20mm coil spacer
  • Optional 30mm coil spacer
  • Optional Adjustable Upper Trailing Arms
  • Optional Adjustable Lower Trailing Arms
  • Optional Brake Adjuster
  • Optional Rear Track Bar
  • Optional Rear Sway bar extensions (mounts to side of chassis)
  • Optional Rear Sway bar extension (mounts to bottom of chassis)
  • Optional 10mm coil spacer
  • Optional 15mm coil spacer
  • Optional 30mm coil spacer

Why Choose Dobinson MRR Shocks?

  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 60mm CNC Machined High Flow Billet Aluminum Race Piston
  • 2.6″ Precision Honed Shock Body
  • 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM-HNBR Sealing System
  • TSUGAMITM CNC machined components for precise tolerances
  • Parker TM Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low-wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • Direct Bolt-On Design
  • CNC TIG Precision Welded Body End Mounts
  • Fully Rebuildable Design
  • MRA59-A685 / MRA59-A885 Long Travel Shocks Require 1.5″ bump stop extensions and extended brake lines
  • If doing a 2.5″ lift or higher in the front, a diff-drop kit or longer TRD CV-axles are REQUIRED, failure to complete these requirements could cause OE CV-axle failure. 14mm bump stop extensions are also required

Related Products

Newsletter Signup

Get the latest news on new products and discounts.

View Cart