Description
Cherokee KL Winch Mount and Bumper (optional)
Kl Winch Mount and Bumper, for the 2014+ Jeep Cherokee. As the Jeep Cherokee gains popularity all around the world, more and more of these vehicles are hitting the trails. Some people don’t think you can take these Jeeps offroad and have some fun, but Cherokee owners know better! After all… ITS A JEEP!
And being that it is a true Jeep, Jeep owners always have the itch to improve, build up, and equip their vehicles for the trail. Rocky Road is the first and only company to introduce true offroad accessories for the new Jeep Cherokee KL, and once again Rocky Road provides a true winch mounting system and bumper kit as well. This was the first on the market, and still the strongest winch system available.
When you’re checking out the photos of our awesome looking system with the winch included, what you cannot see in these photos of the outside of the Jeep is THE MEAT of the Rocky Road winch mounting kit. This is completely tucked inside and behind the factory plastic bumper shell.
Your factory plastic bumper shell is currently mounted to a steel frame, which then attaches to the actual frame of your Jeep. Our kit completely replaces that steel bumper frame and provides a new heavy duty steel frame which also includes the new winch mounting provisions. The Rocky Road winch mounting kit comes with the necessary mounting/hardware in addition to the *factory hardware when your stock steel bumper frame is removed and replaced.
KL Cherokee Winch Bumper
The Rocky Road Winch mount kit is a full bolton system. No need to do metal-work, fabrication, or welding to your Jeep…. As you can see from the photos, an opening does need to be cut into the bumper face itself for the winch cable. While this kit is designed to be do-able by experienced at home do-it-yourselfers, having a body shop or mechanic perform the installation may be helpful. The kit includes a detailed instruction manual with lots of pictures to help make the installation run as smoothly as possible.
PLEASE NOTE: 6cylinder engine Jeeps have a VERY tight fit with the winch. You MUST purchase Warn or Ironman winches only for this kit. The models on this webpage have a slightly smaller clutch drum than all other winches on the market, and so is the only one with the clearance to fit on your 6cyl Jeep!
First thing to know about Rocky Road Bumper kits is that the winch mount is not mandatory.
You can install the bumper kits to the stock plastic bumper if you wish. Understand though that the bumper kits will be more “for show” if installed this way. The Brush Bar and skidplate will only be for very light duty use…
CONVERSELY, if you install a Rocky Road Bumper kit WITH the winch mount, then you will have a strong, heavy duty bumper system which you can use to be pulled with in a controlled manor, or to strap other vehicles to (no yanking recommended). Additionally the Brush Bar kits gain extra strength to help protect your Jeep from impacts such as deer or other unfortunate wildlife encounters on the road, or stout branches and such on the trail.
Cherokee KL Winch kits and Bumpers
DESIGN: When you purchase this bumper system, you can be assured it’s been designed to suit your vehicle. Engineered by US technicians. We use precision cut CAD equipment. Thus, taking all aspects of the vehicle into consideration. Also calculated are mounting strength, wiring and cooling lines and hoses, vulnerable equipment and panels, radiator air flow etc. All other kits are using a thinner gauge steel to cost their cost, which also compromises strength and quality. Rocky Road does not! This is the most HEAVY DUTYand reliable winch mounting system on the planet.
QUALITY: The other most obvious feature that sets Rocky Road equipment apart is the quality. Quality of material, quality of manufacture, quality of finish. Our commitment to quality is visible in every accessory we manufacture.
FINISH: Rocky Road kits have a chemical wash treatment. Then also, high temperature powdercoat application, and a sealing system.
Jeep Cherokee Trailhawk Bumper Bar + Brush Bar Kits
The most well-liked RRO setup on any vehicle we offer is our Bumper Bar kit + the Brush Bar…
The Brush Bar is the push-bar looking kit shown in the photos, offer a Prerunner Skidplate also. The kit is functional as a great brace and impact plate. Our awesome push bar on the front of your Jeep gives it a VERY tough offroad look. The kit really transforms the look of your Jeep from standard SUV, to trail-ready offroad MACHINE. Whether you plan to take it offroad or not.
Our standard Bumper Bar and Brush Bar kits both come with light mounting already included. Space limited for light mounting. How a light mounts fore and aft can make or break fitment.
6CYL JEEP OWNERS: Winch installation requires winch control box to be mounted in the center of the bumper. (see photo up top). If you are wanting to install extra lights, our Brush Bar kit has several light mounting positions. (not visible in the photos). Thus, allows you to run the lights off to the sides and not interfere with the winch control box.
NON-Trailhawk winch and bumper kits
Non-Trailhawk systems are the same winch mounting system as our proven Trailhawk series. The the bumpers and Brush Bar kits for NON-Trailhawk Jeeps do demand a different shape. These kits will fit all NON-Trailhawk model Cherokees, 2014 and newer.
Cherokee Bumper kits work with or without a winch system. This is the same as the Trailhawk series bumpers.
Cherokee KL Bumper and Winch Mount Installation
DNA does a great job of walking you through the Cherokee KL bumper and winch mount installation.

















































