Search
Close this search box.
products-titan_diff2_medium.jpg
products-titan_diff2_medium.jpg
titan-differential-guard-02.jpg
titan-differential-guard-01.jpg

Nissan Titan Diff Guard

Nissan Titan Diff Guard

Model:

TITDIFF1

$209.00

products-titan_diff2_medium.jpg
products-titan_diff2_medium.jpg
titan-differential-guard-02.jpg
titan-differential-guard-01.jpg

Nissan Titan Diff Guard

Nissan Titan Diff Guard

Brand:

Model:

$209.00

Description

Titan Diff Guard

What is the single most exposed component on your entire vehicle? Want a hint? How about, what is the lowest point on your 4WD and therefore the most prone to smashing into rocks, stumps, whatever…. Now you’re getting the picture, YOUR Differential!

All it takes is a split second miscalculation in your otherwise precise, skillful, and dare we say…. quite masterful vehicle driving (we’re not trying to ‘kiss up’ here :^) and your vehicle may be incapacitated from a leaking housing. Or, you may just bend or crack the fragile aluminum housing on your electronic locking diff cover. One glance under your truck and you can see how exposed this fragile looking part is..

That danger makes these an absolute must for the serious offroad enthusiast. From a bone-stock vehicle on up to a built TITAN MONSTER, our diff guard is are THE most basic and essential items for your truck. No more worries about rocks taking out your expensive diff and cooling fins.

Best Titan Differential Guard

Our differential guard uses thick steel plate completely enveloping your aluminum cover and the lower housing of the axle. The mounting system clamps both the front and the rear of the differential for a VERY solid lock. And the front curves up and ramps to the axle housing for a true slider effect. This helps spread the load of any impact over the surface of the differential. Each guard is jig welded for precise fitment every time and clamped for the cooling procedure to help ensure a good straight girdle.

A drip hole on the bottom allows proper drainage for wet and moist environments.

Gusseted and reinforced at multiple positions to handle attack and impact from all directions!

All welds are cleaned and sharp spots are buffed off to leave a clean and smooth product. All Rocky Road Guards are shipped with a glossy BLACK finish for a great look when installed (Please note: photo shots are in red for high contrast illustrative purposes). Low profile of the guard keeps it tucked up high for maximum trail clearance over obstacles and trail debris.

A bolton installation means no cutting or welding required. 2 additional forward mount holes are drilled for the most stable mounting system. This is a kit anyone can install at home in their own driveway!

The Rocky Road Titan Diff guard works for both the standard open rear differential, and the electronic limited slip/locked differential. One kit for both types of axles!

Please Note: Titan Diff guards come powder coated flat black.

Additional information

Weight10 lbs
Dimensions10 × 10 × 10 in
Make Model Year
Nissan Titan 2004 - 2015

Titan Diff Guard

What is the single most exposed component on your entire vehicle? Want a hint? How about, what is the lowest point on your 4WD and therefore the most prone to smashing into rocks, stumps, whatever…. Now you’re getting the picture, YOUR Differential!

All it takes is a split second miscalculation in your otherwise precise, skillful, and dare we say…. quite masterful vehicle driving (we’re not trying to ‘kiss up’ here :^) and your vehicle may be incapacitated from a leaking housing. Or, you may just bend or crack the fragile aluminum housing on your electronic locking diff cover. One glance under your truck and you can see how exposed this fragile looking part is..

That danger makes these an absolute must for the serious offroad enthusiast. From a bone-stock vehicle on up to a built TITAN MONSTER, our diff guard is are THE most basic and essential items for your truck. No more worries about rocks taking out your expensive diff and cooling fins.

Best Titan Differential Guard

Our differential guard uses thick steel plate completely enveloping your aluminum cover and the lower housing of the axle. The mounting system clamps both the front and the rear of the differential for a VERY solid lock. And the front curves up and ramps to the axle housing for a true slider effect. This helps spread the load of any impact over the surface of the differential. Each guard is jig welded for precise fitment every time and clamped for the cooling procedure to help ensure a good straight girdle.

A drip hole on the bottom allows proper drainage for wet and moist environments.

Gusseted and reinforced at multiple positions to handle attack and impact from all directions!

All welds are cleaned and sharp spots are buffed off to leave a clean and smooth product. All Rocky Road Guards are shipped with a glossy BLACK finish for a great look when installed (Please note: photo shots are in red for high contrast illustrative purposes). Low profile of the guard keeps it tucked up high for maximum trail clearance over obstacles and trail debris.

A bolton installation means no cutting or welding required. 2 additional forward mount holes are drilled for the most stable mounting system. This is a kit anyone can install at home in their own driveway!

The Rocky Road Titan Diff guard works for both the standard open rear differential, and the electronic limited slip/locked differential. One kit for both types of axles!

Please Note: Titan Diff guards come powder coated flat black.

Related Products

View Cart