Description
Jeep Cherokee XJ Sway Bar Disconnects
Sway bars are great as they keep your body from rolling around every corner. They really add to the stability of the truck. Unfortunately, they really serve to limit the vehicle’s suspension travel as well.
So…. along comes the sway bar disconnects for lifted XJs. With the pull of a couple pins, you can twist your Jeep up a substantial amount more thanks to your free moving front springs. Quick disconnects are also very important if you have lifted your Jeep and need an extension to the stock sway bar link. Our kit serves both needs extremely well.
Some designs out there are real tough to get back into alignment when it comes time to hit the road home, but these are much more forgiving than that.
Made with a double snapper clip for removing the entire bar, we have four lengths to choose from with either an eye on both the top and the bottom, or a post on the top and an eye on the bottom. The basic kit come complete with black polyurethane bushings in two assembled bars. This kit is good for lifts to about 4″.
Our standard XJ sway bar disconnects kit requires at least 2″ of lift, but also available is our extension system for lifts from 5″ on up. For this integrated system, you would purchase our standard disconnect/extension as pictured above, and also pick up our extension brackets pictured to the right.
