Search
Close this search box.
products-front_cage.jpg
products-front_cage.jpg
products-roll.jpg
products-hoopdiag.jpg
products-gussets.jpg
products-full_cage.jpg
products-hardtop_cage.jpg
products-hellgate.jpg
products-rear_cage.jpg

Samurai Soft Top Roll Cage

Samurai Soft Top Roll Cage

Model:

SJ1552

$944.00

Samurai

Optional items

Optional items

products-front_cage.jpg
products-front_cage.jpg
products-roll.jpg
products-hoopdiag.jpg
products-gussets.jpg
products-full_cage.jpg
products-hardtop_cage.jpg
products-hellgate.jpg
products-rear_cage.jpg

Samurai Soft Top Roll Cage

Samurai Soft Top Roll Cage

Brand:

Model:

$944.00

Samurai

Optional items

Optional items

Description

Samurai Soft Top Roll Cage

This very flexible Samurai roll cage allows you to choose and design your own bar system to fit your needs. This very well could be the single most important modification you ever make to your Samurai. We’ve only had to “use” our roll cage once, but it saved us. Dropping into a gully in Arizona, we stuck it on the nose and the tail end just went up and over. Knowing we were going to be safe because we had a cage kit…. Priceless.

Thinking of a bolt-on style cage? STOP! The question would then be do you want easy installation, or do you want something that will really work when things goes wrong. Bolt-on cages look pretty and sound nifty, but the bottom line is they are dangerous if you think they’ll do anything to offer protection. Try and take a bolt-on cage to any competition or event that requires roll protection and you’ll not only fail the safety inspection… you’ll get laughed out of the joint. Safety would be their primary concern, and so should it be yours!

Samurai Roll Cage Construction

Our cages offer the best, closest fit you can get! The full cage replaces the factory thin-wall main hoop and wimpy supports with a full .120″ competition-spec thickness bar. By fitting the cage close, body damage may be reduced in the event of an “incident”. Front kits come with a front hoop with over the dash bar alreadywelded in, pre-notched hoop connector bars, main hoop, full diagonal braces,gussets, shoulder belt tabs, hardware, and instructions. Check out the features.

Top of the line DOM .120″ tube
Super close fit, described by customers as “fits like a glove!”
Main hoop brackets (all four) are already welded on as is the dash bar
All tubes are notched perfectly, so you simply place them and weld them
All hardware (grade 5 3/8″ fasteners with nylock nuts) included
Doesn’t block dash vents or switches
Kits are built from Mandrel-bent 1.5″ ERW tubing specifically for the Samurai.

Samurai Roll Cage Fitment

You can run them with any hardtop, softop, or any configuration of Samurai. We love to run with the targa bars off in the Summer as pictured. Don’t throw your money away on bolton kits. Do it right the first time, protect yourself and your passengers, and pick up one of our weldon cages. While no one ever expects to roll, this could be the most important purchase you ever make on your Samurai.

Samurai Roll Cage Components:

Components for the front cage, plus new main hoop, mounting plates, shoulder tabs, and rear down bars to the tailgate as highlighted to the left. 6-point mounting system as shown.

Please note, our one listing for the Long Wheelbase Sport Cage also contains the Rear Cage kit as listed below.

Kits available for softop or internal hardtop installation.

Samurai Front Roll Cage Kit

This kit includes the front main bar over dash, mounting plates, and connecting bars to the factory main tube bar. The connectors will weld to the factory tube. This is a good add-on system for those on a tight budget that still want some additional protection.

Works for either softop or hardtop Samurais.

Samurai Rear Roll Cage Kit

This setup adds onto our Sport Cage to give you a full overhead system. Provides protection for rear occupants. We’ve also used it to help strap extra gear to the roof on long offroad trips.

Kits contains the rear main hoop and two connector bars as highlighted to the left.

Samurai Roll Cage Kit

This is the same great engineering and basic design as our regular Softop cage kits. Fitting to a hardtop (factory steel roof) does present some hurdles, but our kits are specifically engineered to fit within your top for excellent protection in the even of a “situation”.

Additional Pre-notched bars
from front hoop to main hoop. As pictured to the right on our Zukinni Samurai (yes, its a grainy shot), these additional bars give some center support to the main protective hoops. Its hard to tell from the photo, but we also have our CB radio mounted between the middle bars. They’re just a great way to help beef up your roll protection.

This support is a great way to beef up the strength of your main hoop. You will see it in many competition style cages.

Does make it tough for passenger’s to get into the back seat from the front compartment, so keep that in mind.
Gussets
These are actually required in most rockcrawling competitions and a good idea besides. Very inexpensive and just another way to protect yourself and your occupants.

Additional information

Weight150 lbs
Dimensions40 × 6 × 30 in
Make Model Year
Suzuki Samurai 1985 - 1995

Samurai Soft Top Roll Cage

This very flexible Samurai roll cage allows you to choose and design your own bar system to fit your needs. This very well could be the single most important modification you ever make to your Samurai. We’ve only had to “use” our roll cage once, but it saved us. Dropping into a gully in Arizona, we stuck it on the nose and the tail end just went up and over. Knowing we were going to be safe because we had a cage kit…. Priceless.

Thinking of a bolt-on style cage? STOP! The question would then be do you want easy installation, or do you want something that will really work when things goes wrong. Bolt-on cages look pretty and sound nifty, but the bottom line is they are dangerous if you think they’ll do anything to offer protection. Try and take a bolt-on cage to any competition or event that requires roll protection and you’ll not only fail the safety inspection… you’ll get laughed out of the joint. Safety would be their primary concern, and so should it be yours!

Samurai Roll Cage Construction

Our cages offer the best, closest fit you can get! The full cage replaces the factory thin-wall main hoop and wimpy supports with a full .120″ competition-spec thickness bar. By fitting the cage close, body damage may be reduced in the event of an “incident”. Front kits come with a front hoop with over the dash bar alreadywelded in, pre-notched hoop connector bars, main hoop, full diagonal braces,gussets, shoulder belt tabs, hardware, and instructions. Check out the features.

Top of the line DOM .120″ tube
Super close fit, described by customers as “fits like a glove!”
Main hoop brackets (all four) are already welded on as is the dash bar
All tubes are notched perfectly, so you simply place them and weld them
All hardware (grade 5 3/8″ fasteners with nylock nuts) included
Doesn’t block dash vents or switches
Kits are built from Mandrel-bent 1.5″ ERW tubing specifically for the Samurai.

Samurai Roll Cage Fitment

You can run them with any hardtop, softop, or any configuration of Samurai. We love to run with the targa bars off in the Summer as pictured. Don’t throw your money away on bolton kits. Do it right the first time, protect yourself and your passengers, and pick up one of our weldon cages. While no one ever expects to roll, this could be the most important purchase you ever make on your Samurai.

Samurai Roll Cage Components:

Components for the front cage, plus new main hoop, mounting plates, shoulder tabs, and rear down bars to the tailgate as highlighted to the left. 6-point mounting system as shown.

Please note, our one listing for the Long Wheelbase Sport Cage also contains the Rear Cage kit as listed below.

Kits available for softop or internal hardtop installation.

Samurai Front Roll Cage Kit

This kit includes the front main bar over dash, mounting plates, and connecting bars to the factory main tube bar. The connectors will weld to the factory tube. This is a good add-on system for those on a tight budget that still want some additional protection.

Works for either softop or hardtop Samurais.

Samurai Rear Roll Cage Kit

This setup adds onto our Sport Cage to give you a full overhead system. Provides protection for rear occupants. We’ve also used it to help strap extra gear to the roof on long offroad trips.

Kits contains the rear main hoop and two connector bars as highlighted to the left.

Samurai Roll Cage Kit

This is the same great engineering and basic design as our regular Softop cage kits. Fitting to a hardtop (factory steel roof) does present some hurdles, but our kits are specifically engineered to fit within your top for excellent protection in the even of a “situation”.

Additional Pre-notched bars
from front hoop to main hoop. As pictured to the right on our Zukinni Samurai (yes, its a grainy shot), these additional bars give some center support to the main protective hoops. Its hard to tell from the photo, but we also have our CB radio mounted between the middle bars. They’re just a great way to help beef up your roll protection.

This support is a great way to beef up the strength of your main hoop. You will see it in many competition style cages.

Does make it tough for passenger’s to get into the back seat from the front compartment, so keep that in mind.
Gussets
These are actually required in most rockcrawling competitions and a good idea besides. Very inexpensive and just another way to protect yourself and your occupants.

Related Products

View Cart